Introduction:
A garden bench is not only a practical piece of outdoor furniture, but also a beautiful addition to any garden or patio. If you are handy and have a few tools at your disposal, you can build a simple garden bench yourself with just a few materials and tools. In this article, we will show you how to build an attractive and functional garden bench step by step.
What you need:
4 wooden boards (120 cm long, 10 cm wide, 3 cm thick)
2 wooden boards (120 cm long, 6 cm wide, 3 cm thick)
4 wooden boards (30 cm long, 6 cm wide, 3 cm thick)
Screws
Cordless screwdriver or screwdriver
drill
Wood glue
Sandpaper
Tape measure
saw
Step 1: Preparation
Measure and mark the positions of the seat and backrest boards on the longer wooden boards (120 cm long, 10 cm wide, 3 cm thick). Make sure the marks are even on both sides of the boards to get a symmetrical garden bench. Then drill holes in the marked positions to attach the boards with screws later.
Step 2: Attach the seat and backrest boards
Apply wood glue to the ends of the shorter wooden boards (30 cm long, 6 cm wide, 3 cm thick) and attach them to the longer wooden boards with screws to attach the seat and backrest boards. Make sure the boards are aligned flush and the screws penetrate the wood well to ensure a stable construction.
Step 3: Attach the legs
Measure and mark the positions of the legs on the bottom ends of the longer wooden boards (120 cm long, 10 cm wide, 3 cm thick). Then drill holes in the marked positions and attach the legs with screws. Make sure the legs are perpendicular to the seat and securely attached to create a stable garden bench.
Step 4: Grinding and finishing
Sand all edges and surfaces of the garden bench thoroughly to remove any bumps and splinters. Then apply a wood stain or paint if desired to protect the garden bench from the elements and give it an attractive finish.
Conclusion:
With just a few tools and materials, you can build a simple yet attractive garden bench for your outdoor space.
